Page | 14 Getting Started
2. GETTING STARTED
1. Insert the small end (USB) of the Home Unit’s power
adapter (Output 5V, 1500mA) into the USB socket
in the back of the Home Unit.
2. Insert the other end of the power adapter into a
suitable electrical outlet.
3. Slide the ON/OFF switch to the ON position to
switch on the Home Unit. The power indicator
lights up in blue.
4. Slide the ON/OFF switch to the OFF position to
switch o the Home Unit. The power indicator
lights up in red, indicating that the battery is being
charged.
*IMPORTANT: Only use the supplied power
adapter.*
Home Unit Power Supply
To Next Page
Loading...
