Getting started
www.kodak.com/go/support
6
Attaching the camera insert
■ Attach the custom camera insert included with your
camera.
It provides a perfect fit for your camera.
Contact your regional technical support for a
replacement insert.
Docking your camera; turning on the dock
■ Place your camera on the dock.
NOTE: Make sure the camera is set to the appropriate regional
format (NTSC or PAL). See your camera user’s guide for
details.
OR
■ Press the ON/OFF button on the remote control.
The power light goes on.
The welcome screen appears on your television while
the dock is initializing, then the Home screen appears
(see page 10).
ON/OFF
Power
light
To Next Page
Loading...
