Kodak DUAFLEX III - Page 22

vdith the
SM
or
SF
lamp
Check
the Time Button.
It must
be in
the up
position
at
"I."
In-
sert an SM
or SF fash
lamp in
the
reflector
socket. Push the
lamp
straight
in
without
twisting
it. Be
sure that
the
lamp
base is
clean and
bright.
Check
the
lamp-to-subject
dis-
tance
accorditrg
to
the table on
the flasholder
reflector.
Check
the
signal window
to
be
sure
it shows
black.
Locate
the
subject in
the finder.
Press
the Exposure
Button
until
it clicks. This
will open
the
shut-
ter and flash
the
lamp.
Remove
the
used lamp
by
press-
ing the_
lamp
release
on
the
top
of the
fasholder.
Do
not
pull
thb
Iamp
by
f
orce.
always
allow used lamps
to cool
before
handling.
2I
www.orphancameras.com