Doing more with your camera
www.kodak.com/go/support
32
White Balance
Choose your lighting
condition. (Available only in
Program and Panorama
modes.)
Auto—Automatically corrects white balance. Ideal for general
picture taking.
Daylight—For pictures in natural lighting.
Tungsten—Corrects the orange cast of incandescent light
bulbs. Ideal for indoor pictures under tungsten or halogen
lighting without flash.
Fluorescent—Corrects the green cast of fluorescent lighting.
Ideal for indoor pictures under fluorescent lighting without
flash.
Open Shade—For pictures in shade in natural lighting.
Focus Mode
Choose a focus distance.
Auto—For general picture-taking.
Macro—For sharpness and detail in pictures at close range.
Use available light instead of flash, if possible. The camera
automatically sets the focus distance depending on the zoom
position.
Infinity—For distant subjects; auto-focus framing marks are
unavailable.
Focus/Exposure Zone
Choose how the camera
assesses the scene for
exposure and focus.
Face Priority—If faces are detected, they receive
focus/exposure priority. (If faces are not detected, the camera
switches to Multi-Zone.)
Multi-Zone—Evaluates 5 zones to give an even picture
focus. Ideal for general picture taking.
Center-Zone—Evaluates the small area centered in the lens.
Ideal for focusing on a precise area.
AF Control (Still)
Choose an auto-focus setting.
Continuous AF—Because the camera is always focusing
during liveview, there is no need to press the Shutter button
halfway down to focus.
Single AF—Focuses when the Shutter button is pressed
halfway down. (This setting uses less battery power.)
Settings More information
To Next Page
Loading...
Need help?
General
Weight and Dimensions
