Doing more with your camera
www.kodak.com/go/support
33
AF Control (Still)
Choose an auto-focus setting.
Continuous AF—Because the camera is always focusing,
there is no need to press the Shutter button halfway down to
focus.
Single AF—Uses TTL-AF (through-the-lens auto focus) when
the Shutter button is pressed halfway down.
White Balance
Choose your lighting
condition. (Available in Smart
Capture mode.)
Auto—Automatically corrects white balance. Ideal for general
picture taking.
Daylight—For pictures in natural lighting.
Tungsten—Corrects the orange cast of household light
bulbs. Ideal for indoor pictures under tungsten or halogen
lighting without flash.
Fluorescent—Corrects the green cast of fluorescent lighting.
Ideal for indoor pictures under fluorescent lighting without
flash.
Open Shade—For pictures in shade in natural lighting.
Focus/Exposure Zone
Select a large or concentrated
area of focus.
Face Priority—The camera attempts to focus on faces.
Multi-Zone—Evaluates 5 zones to give an even picture
focus. Ideal for general picture taking.
Center-Zone—Evaluates the small area centered in the lens.
Ideal when you need precise focus.
ISO Speed
Control the sensitivity of the
camera to light.
See Specifications, starting on page 44.
Sharpness
Control picture sharpness.
See Specifications, starting on page 44.
Red-eye Reduction
The Red-eye flash fires
automatically before a picture
is taken.
Preflash—The flash fires before the picture is taken to reduce
the chance of red-eye.
Digital correction—The camera digitally corrects red-eye
after a picture is taken. (Processing time after taking a picture
may increase.)
Settings More information
To Next Page
Loading...
Need help?
General
Weight and Dimensions
