Troubleshooting
www.kodak.com/go/support
47
Picture quality problems
Status Solution
Picture is not clear ■ To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■ Clean the lens (see page 51).
■ Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■ Use a larger picture size (see page 39).
■ If you’re manually adjusting the ISO speed, realize that a high ISO
setting may cause grainy pictures (see page 16).
Picture is too dark ■ Reposition the camera for more available light.
■ Use Fill flash (see page 13) in Program mode, change your position
so light is not behind the subject, or use the Backlight SCN mode.
■ Move so that the distance between you and the subject is within the
effective flash range. (See Specifications starting on page 49.)
■ To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■ In Program mode, increase the Exposure Compensation (see
page 16).
Picture is too light ■ Reposition the camera to reduce the amount of available light.
■ Turn the flash off (see page 13).
■ Move so that the distance between you and the subject is within the
effective flash range. (See Specifications starting on page 49.)
■ To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■ In Program mode, decrease the Exposure Compensation (see
page 16).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
