Getting started
www.kodak.com/go/support
9
Copying pictures directly from a computer
Pictures copied from your computer are not resized to a lower resolution on the frame.
To save space on your frame, first resize your pictures on your computer (800 x 600
resolution is best).
1 Connect your frame to the computer with a USB cable (Series mini-B, purchase
separately). Your frame appears as a removable USB device on the computer.
2 Using your computer operating system, copy or drag pictures to the frame.
NOTE: Your frame does not support copying from the frame to a computer.
Copying pictures from a computer, using memory card
The easiest way to copy a large number of pictures from your computer to your
frame’s internal memory:
1 Insert an empty memory card or USB device into your computer.
2 Copy some or all of the pictures from your computer onto the card or USB device.
3 Remove the card or USB device from your computer, and insert it into the frame.
4 Follow the copy directions on page 8 (highlight All pictures, then press OK).
Copying pictures from a digital camera
1 Remove the memory card (containing pictures) from your camera, and insert it into
the frame.
2 Follow the copy directions on page 8.
Purchase USB cable
separately
To Next Page
Loading...
