Connecting your KODAK Wireless Frame to your Flickr® photos
www.kodak.com/go/support
3
Connect your Flickr® account to your frame
First—Configure your frame using the KODAK EASYSHARE Digital Display
Software on your computer.
If you haven’t done so already, install the EASYSHARE Digital Display Software
(included on the CD that came with your frame). You can also download it from
the Downloads page.
For MACINTOSH OS Users, here’s how to open your Device Settings Web page:
1 Make sure the frame is connected to your wireless network and your computer
is connected to the Internet.
2 Get your frame’s IP address:
a On the frame, tap (Home) > (Settings) > Network, then tap
Select.
b Make a note of the IP address (format: XXX.XXX.X.XXX) from the frame’s
Network settings screen.
3 Open a browser (for example, SAFARI, MOZILLA FIREFOX, etc.) on your
KODAK EASYSHARE Digital Display Software
Click
Device
Settings
To Next Page
Loading...
