Doing more with your camera
www.kodak.com/go/z1275support 19
Changing P or M mode settings
P/M modes control ISO, Focus, exposure compensation, shutter speed, and aperture
(f-number, also known as f-stop). Use the Menu button to control all other settings.
1 Turn the Mode dial to P/M.
The mode options are displayed.
2 Use to move between settings and to change the value.
NOTE: Some settings may be unavailable (see P/M color options above). The arrows disappear when you
cannot make further value changes.
3 Take a picture.
Aperture
Shutter speed
Exposure compensation
White—selectable
Grey—non-selectable
Yellow—changeable value
Red—out of range
ISO speed
P/M Options
Focus mode
Mode
urg_00732.book Page 19 Monday, March 26, 2007 9:13 AM
To Next Page
Loading...
