1 Tap in camera Panel
2 In the advanced section, enter admin password
default 123456.
3 Select sensor setup.
Tap «+» to add sensor device.
If you already remove the batteries protection
plastic, please open the cover, remove and
reinstall the battery
4 Name your device and tap «save».
5 Tap «Camera Pan control» to calibrate the
camera position, and save the settings.
Add Sensors
Your camera can work with up to 6 KODAK Security Accessories : Door Sensor, Motion
sensor or remote control. Please follow the installation process as below :
ADD SENSORS
Sensor Setup
58 %
Add Sensor
58 %
Pairing
58 %
- Remove plastic tab.
You have 30s to complete pairing
30sec
To Next Page
Loading...
