Kodak KB18 User Manual

6
3. Pull out the film leader until the
tip reaches the
FILM - LOAD MARK (19).
• Make sure the sprocket teeth
show through the holes on the
upper side of the film.
• Lay the film flat between the film-
guide rails rotating the film
cartridge in the direction of the
FILM - SPROCKET TEETH (12).
Film-Load
Mark
Film-Guide Rails
Film Leader
• If the end of the film extends past
the film-load mark, gently push
the excess back into
the cartridge.

Kodak KB18 Specifications

General

Brand	Kodak
Model	KB18
Category	Digital Camera
Language	English