Kodak PIXPRO SP360 4K - Page 57

56
2. Press the lock downward until it locks tightly. Install the waterproof housing on
the other accessories, and use the set screw to tighten.
Waterproof Housing: For use with other accessories underwater, in rain, on the seashore, or in other circumstances where waterproong is
required
Installation method:
1. Removethecamera's lens cover, place the camera and anti-fog inserts
into the waterproof housing.
Beforeusingthecamerainawetenvironment,pleasebesuretoputitinsidethewaterproofhousingrst.Also,itshouldnotbesubmergedtoadepthgreaterthan60
m (196 feet) underwater.
Anti-fog inserts absorb moisture. Please make sure it is dry before use (heat it in a 150°C oven for around 5 minutes). Each anti-fog insert can be reused up to 4
times.
Beforeopeningthewaterproofbox,theswitchonthelockcatchneedstobeopenedaccordingtothearrowdirectionrstly.
Anti-Fog Inserts
Lock