Kodak PIXPRO SP360 4K - Page 58

57
Flat Adhesive Mount: For tacking onto a skateboard or other at
objects
Installation method:
Therearetwotypesofadhesivemounts:atandcurved.Youmayselectbasedontheshapeoftheobjecttobeused.
Both types can be assembled in the same way:
1. Assemble the standard housing (or the waterproof housing) ( 55/56).
2. Fasten the standard housing (or the waterproof housing), install adhesive mounts according to the diagram, and use the setscrew to tighten.
3. Tack the double-sided adhesive at the bottom of the adhesive mount to the object to be used.
The double-sided adhesive is disposable. It should be replaced by a new one after being peeled off.
Curved Adhesive Mount: For tacking onto a helmet or other curved
objects
Double-sided adhesive