Kodak REELZ - Fast Forward Function; Main Menu: Settings

14
NOTE: Use the dotted line to thread the negative for the rewind process.
The ilm should be lifted out of the ilm slot so the gray pin doesn’t slow down the ilm.
Fast Forward Function
1. Press the Up or Down button to choose the “Fast Forward” option in the Menu.
2. Press the OK/Enter button to enter the option.
3. After entering, press the OK/Enter button according to the prompts.
NOTE: Fast forward and rewind are both used to wind up your reel. The only dierence is that in
order to rewind, you must swap the placement of the reels. For rewinding, reels must
be swapped so the ilm can still be scanned correctly. Fast forward is used to decide
where you will start recording. Use fast forward to speed through certain parts of your ilm.
Use the dotted line to thread the negative for the fast forward process.
The ilm should be lifted out of the ilm slot so the gray pin doesn’t slow down the ilm.
MAIN MENU: SETTINGS
Select “Settings” in the main menu interface and press the OK/Enter button to enter the settings
interface. In the settings interface, you should see the options: Language, Filmtype, USB Upload,
Erase SD card, Factory Reset, and About.