WIRELESS ART & CRAFT PRINTER
JF383UC
★★★★★
2
Selecting Material
1
Overview
Quick Craft Guide
© 2017 Funai Electric Co., Ltd. All rights reserved.The Kodak trademark, logo and trade dress are used under license from Kodak.
Material button
Photo tray (4x6")
Scanner
Paper exit tray
Ink door
Top tray (8.5x11")
Wireless button
Copy button
Power/Standby button
AC inlet
Rear tray
Printer USB port
Material Selection
LEATHER use for light
and thin material.
LOAD at rear tray
OK
Cra Print
Cancel
Place the material on
the rear tray
and push material
into the tray
Material Selection
Paper
Cardstock
Fabric
Leather
Custom
3
Loading Material
Select a material type “cardstock/fabric/faux leather/
custom” on the printer or through your tablet/
smartphone app.
When “paper” is selected, printing will be done
through the top or photo tray.
When cardstock, fabric, faux leather or custom is
selected, printing will be done through the unique
craft rear tray.
Material settings will be held by the printer until the
printer goes into sleep mode (default 10 minutes).
The printer’s default material setting is for paper.
Material Selection
LEATHER use for light
and thin material.
LOAD at rear tray
OK
Open or create a content ile or photo to be printed
on your PC, tablet or smartphone. Print the content
and wait until the printer display shows “Place the
material on the rear tray and push material into the
tray”.
Cra Print
Cancel
Place the material on
the rear tray
and push material
into the tray
Load the material with two lat hands gently into the
printer until you feel some resistance (level depends
on thickness of material) and the printer display
shows
.
a b c
Bonus Anna Griin Design Templates
Install the KODAK VERITÉ Craft app (iOS/Android)
from the app store and instantly access to bonus
craft content.
ENJOY
FREE BONUS
MATERIAL
4
How to Print from Your Device
PC/Laptop
b
Install the PC driver and set up your printer via USB or Wi-Fi by following the
on-screen instructions.
a
Download a PC driver using the following URL.
* Requires Mac OS X v10.9 or later
www.kodakverite.com/support
*
c
Create and print your personal images or photos by using your favorite 3rd party
software (not included) from your PC/Laptop.
Tablet and Smartphone App
a
Search “kodak verite craft” at App Store or Google Play.
kodak verite craft
b
Install “KODAK VERITÉ Craft” App.
c
Create and print your personal images by selecting “Print Your Own Design” from
the KODAK VERITÉ Craft App.
www.kodakverite.com/printer/kodak-craft
Discover the KODAK VERITÉ Craft printer features videos on:
www.kodakverite.com/support
Learn more: additional help and information
Note(s)
For the best printing results please use print with border
as it is dificult to print accurate edge to edge with thicker
craft materials.
OK
Material Selection
LEATHER use for light
and thin material.
LOAD at rear tray
b
Display will show material selected and
where to load.
Material Selection
Set material
aer print is started.
OK
c
Conirm setting by pressing .
Material Weight
Top tray
Plain paper
17 - 24 lb.
64 - 90 g/m
2
Photo paper
(Glossary)
50 - 65 lb.
180 - 240 g/m
2
Envelope
20 - 24 lb.
75 - 90 g/m
2
Card
90 - 110 lb.
163 - 200 g/m
2
Material Details
Rear tray
Cardstock Used for greeting, photo and decoration cards
Fabric
Used for lightweight cotton or cotton/polyester fabrics
Leather Used for faux leather
Custom
Custom settings allows you to select optional materials
through the KODAK VERITÉ Craft app (iOS/Android). For
more information download the KODAK VERITÉ Craft app
and select Tutorial under Print your own Design.
Note(s)
The KODAK VERITÉ Craft printer can accept a maximum material thickness of 1.2 mm (0.05”) through the rear tray.
Non-rigid materials need to be handled carefully during loading as the material might bend and cause a jam. The best way is to support the material during
loading with two lat hands into the rear tray.
Thin lexible materials should be taped to a paper carrier to keep it lat during printing as long as the overall thickness does not exceed 1.2 mm (0.05”).
Make sure that the material selected are printable. For example some of the vinyl materials cannot be used as the ink will smear/not dry. Please use only
printable vinyl or add an Inkjet print primer (not included) to you material
Make sure that materials loaded through the rear input tray don’t have rough edges, strings or loose parts may cause the printer to jam.
a
Select material type on the control panel
of printer or through the App.
