Kodak ZM2 - Setting Up Your Camera: Memory Card; Inserting a Memory Card

2 www.kodak.com/go/support
Setting up your camera
Inserting a MICROSD or MICROSDHC Card
Your camera has limited internal memory—good for a few practice videos/pictures.
Maximum supported card size is 16 GB.
NOTE: The included MICROSD Card is already inserted.
CAUTION:
A card can only be inserted one way; forcing it may cause damage.
Inserting or removing a card while the camera is on may damage the
video/pictures, the card, or the camera.
Close the door properly See page ii
Purchase accessories www.kodak.com/go/Zm2accessories
1
Turn off the camera.
2
Insert the card until
it clicks and locks
into place.
To remove the card,
push and release it,
then pull it out.
NOTE: Avoid touching the
card’s metal contacts.
To clean the contacts, use a dry
cotton swab or a lint-free cloth.
Metal
contacts
face up.