Need help?Do you have a question about the Kodiak 6.0L and is the answer not in the manual?
General| Configuration | V8 |
|---|---|
| Fuel Type | Gasoline |
| Fuel System | Sequential Fuel Injection |
| Displacement | 6.0L |
| Horsepower | 300 hp |
| Torque | 360 lb-ft |
| Compression Ratio | 9.4:1 |
| Bore x Stroke | 4.00 in x 3.48 in |
| Valvetrain | OHV (Overhead Valve) |
| Cooling System | Liquid-cooled |
Guidance on navigating and utilizing the manual for effective operation and maintenance.
Locating and recording the engine's unique model and serial numbers for service and parts.
Details on filling out and submitting the warranty card for coverage.
Visual identification of key engine parts and their locations on the unit.
Information on acquiring replacement parts and locating service support.
How to purchase additional service and parts manuals for Kodiak engines.
Essential checks before operating the engine to ensure safety and proper function.
Understanding the function and interpretation of the engine's warning lights.
Steps and precautions for safely starting the engine under various conditions.
How the ECM manages fuel delivery for optimal engine starting.
Specific considerations for starting a cold engine and its idle behavior.
Recommended steps for safely shutting down the engine during normal operation.
Procedures for stopping the engine when it experiences abnormal overheating conditions.
Required checks and procedures before the engine is put into service.
Regular service points to maintain engine performance and longevity.
A guide to scheduled maintenance intervals and tasks for optimal engine care.
Detailed technical data for the 2.4L / 147 engine model.
Detailed technical data for the 4.3L / 262 engine model.
Detailed technical data for the 5.7L / 350 engine model.
Detailed technical data for the 6.0L / 364 engine model.
Detailed technical data for the 6.2L LS3 / 376 engine model.
Key service information summary for the 2.4L / 147 engine.
Key service information summary for the 4.3L / 262 engine.
Key service information summary for the 5.7L / 350 engine.
Key service information summary for the 6.0L / 364 engine.
Key service information summary for the 6.2L LS3 / 376 engine.
Procedures for checking and maintaining the correct engine oil level.
Instructions for safely removing and installing the engine oil filter.
Understanding the purpose of the flame arrestor and its maintenance requirements.
How to properly check and maintain the engine's coolant level.
Procedures for inspecting and maintaining the heat exchanger.
Guidance on inspecting the serpentine belt for wear and tension.
Importance and procedure for changing the fuel/water separator filter.
Guidelines on recommended fuel types and octane ratings for the engine.
Explanation of how altitude affects engine power and sensor compensation.
Choosing the correct spark plugs and setting the proper gap for optimal ignition.
Identifying and addressing frequent issues encountered with the engine.
Steps to diagnose and resolve issues when the engine fails to crank.
Troubleshooting steps for when the engine cranks but does not ignite.
Identifying causes and solutions for engine overheating conditions.
Information on authorized engine use and adherence to emissions standards.
Detailed maintenance tasks and checks required at specific hour intervals.
Specific maintenance requirements for the 400-hour service interval.
Key maintenance tasks and replacements for the 800-hour service interval.
Overview of owner responsibilities and rights concerning the emission control warranty.
List of specific engine components covered under the emission warranty.
Conditions and circumstances under which warranty coverage may be denied.
Details of the 3-year limited warranty, including coverage and limitations.
Specific conditions that are not covered by the Kodiak Marine engine warranty.
Procedures for using the OBD system for engine diagnostics and troubleshooting.
Steps for verifying engine cranking and starting after diagnostic checks.
Interpretation of diagnostic codes related to sensor voltage faults.
Understanding codes indicating failures in system or component intelligence.
Diagnostic codes related to fuel injectors, ignition coils, and related systems.
Codes for engine misfires, governor commands, and various other system issues.
List of authorized service dealers in various locations across the United States.
List of authorized service dealers in British Columbia and Alberta, Canada.
List of authorized service dealers in Krasnoyarsk, Russia.
Diagrams illustrating the engine's electrical system and component connections.
To Next Page
