To Next PageTo Next Page
Need help?Do you have a question about the Kodiak K16 and is the answer not in the manual?
General| Brush Motor | 1.5 hp |
|---|---|
| Cleaning Path | 16 inches |
| Power Cable | 50 feet |
| Height | 42 inches |
| Power Source | Electric |
| Voltage | 120 V |
| Pad Size | 16 inches |
| Speed | 175 RPM |
Locate the serial number of your machine on the lower half of the control panel.
The Kodiak K16 is for commercial applications with hard floor surfaces.
Section to fill out machine details for future reference.
Instructions for inspecting and removing the machine from its shipping pallet.
Explains safety symbols and basic operational precautions.
Rules for operating, leaving, and servicing the machine safely.
Warnings about batteries, environment, clothing, and maintenance.
Identifies machine components and explains the command panel.
Guides for squeegee installation, adjustment, and battery setup/charging.
Steps for driving, filling the solution tank, scrubbing, and drying.
Procedures for draining and flushing the recovery tank.
Instructions for using the optional vacuum wand accessory.
Information on the optional onboard charger feature.
How to adjust the brush pressure for optimal cleaning.
Understanding the vacuum clog indicator light.
Steps to clean the cylindrical hopper.
Procedure for charging the machine's batteries.
How to clean the white filter/screen and solution filter.
Instructions for rotating disk and cylindrical brushes.
Guide for replacing orbital pads and squeegee blades.
Procedure for draining the clean solution tank.
How to replace the deck shroud curtains.
Steps for replacing the cylindrical side wipers.
Guide for ensuring the scrub deck is properly leveled.
Lists common wear parts like pads, screens, brushes, and squeegees.
Preventative Maintenance (PM) checklist for the machine.
Details on console and onboard battery chargers.
