Kody Technologies RockyMounts GuideRail

To Next Page

Kody Technologies LLC

Bike Rack Light – RockyMounts GuideRail

Kody Technologies LLC www.kodytechnologies.com

Protect Your Ride Davis CA, 95618

Congratulations on your purchase and thank you for

your commitment to road safety for your bikes,

friends, family, and those around you. Read and

follow this instruction guide to install your new Kody

Bike Rack Light.

Disclaimer

Tail, Brake and Turn signal lights are a critical safety

feature during the operation of your vehicle. Rack

lights increase your vehicle’s visibility when the lights

are obstructed by a bike rack, or any other device

mounted to the rear of the vehicle. Please read and

review all information carefully before installation.

Install the light per the instructions and verify

functionality on a regular basis. If you have any

questions or concerns, please contact us at Kody

Technologies.

• Always verify cable routing and connection and

test light function prior to driving, using the light

and relying on it for your safety.

• This light adds four pounds to the load on your

bike rack. Check rack manufacturer’s manual to

verify the total load on the rack does not exceed

any limits.

• Rack lights improve your visibility and signal

communication on the road. They are not a

substitute for driving safely and following all traffic

laws.

• Kody assumes no liability for injury to persons,

damage to movable or immovable property, loss

of profit, or any other loss or damage caused by

the improper mounting or use of the carrier,

including but not limited to mounting or use in

conflict with the assembly instructions, mounting

instructions or any other instructions given, in

writing or verbally, by Kody.

Kody Technologies LLC does not assume any

responsibility or liability for accidents or injuries

resulting during use of this product or misuse of this

product.

Product Warranty

We've designed an extremely rugged rack light and

are proud to provide a 1-year warranty on any failure

on the electronics or hardware. If you experience any

issues with your light please contact us, return it and

we'll ship you a replacement.

Return Policy

If you are not 100% satisfied with the rack light, please

free return policy. Return the light assembly in like-

new condition and we'll ship you a replacement or

refund your money. Most importantly we want to

understand any issues you experience so we can

address them, and we can continuously improve our

products.

Any questions, ideas, or concerns? Please contact us

at customerservice@kodytechnologies.com

Need help?

Do you have a question about the Kody Technologies RockyMounts GuideRail and is the answer not in the manual?

Summary

Product Safety & Warranty Information

Product Warranty Details

Covers electronic and hardware failures with a 1-year warranty, offering replacements for issues.

Return Policy

Provides a 30-day hassle-free return policy for full satisfaction, with options for replacement or refund.

Contact Information

Offers contact details for questions, ideas, or concerns regarding the product.

Bike Rack Light Installation

Pre-Installation Checks

Review hardware and light preparation, including removing end cap screws with an allen wrench.

Mounting Procedure

Align light holes with end cap screw holes, use washers, and tighten screws securely.

Cable Routing and Connection

Route cables carefully, securing them to avoid pinching, and connect to vehicle trailer for testing.

Final Installation Steps

Install license plate and Kody sticker. Test all light functions for safety and compliance.

The Kody Technologies LLC Bike Rack Light, specifically the RockyMounts GuideRail model (Model#: 101-016), is an accessory designed to enhance vehicle visibility and signal communication when a bike rack obstructs the vehicle's rear lights. This device is crucial for road safety, ensuring that tail, brake, and turn signals are clearly visible to other drivers, especially when bikes are mounted on the rack.

Function Description:

The primary function of the Kody Bike Rack Light is to replicate the vehicle's tail, brake, and turn signals (left and right-hand turn signals, and hazard lights) when the vehicle's existing lights are obscured by a bike rack or other rear-mounted devices. By providing an additional set of lights at the rear of the bike rack, it significantly increases the vehicle's visibility and helps communicate driving intentions to other road users, thereby reducing the risk of accidents. The light is designed to integrate seamlessly with the RockyMounts GuideRail bike rack, installing at the back onto the end cap mounting screws. It utilizes existing hardware along with provided spacers to ensure a clean fit that does not interfere with tray adjustments or bike loading.

Important Technical Specifications:

Model Number: 101-016
Compatibility: Specifically designed for RockyMounts GuideRail bike racks.
Weight Addition: Adds approximately four pounds to the bike rack's load. Users are advised to check their rack manufacturer's manual to ensure the total load (rack + bikes + light) does not exceed specified limits.
Installation Hardware: Uses existing end cap mounting screws (requiring a 5mm allen wrench for removal and tightening) and includes black washers for proper spacing during installation.
Light Functions: Supports tail lights, brake lights, hazard lights, and left/right-hand turn signals.
Connection: Connects to the vehicle's trailer connection.
Durability: Described as an "extremely rugged rack light."

Usage Features:

Enhanced Safety: Significantly improves vehicle visibility and signal communication, especially when bike racks obstruct factory lights.
Easy Installation: The light is designed for straightforward installation using existing mounting points on the RockyMounts GuideRail rack. The process involves removing two end cap screws, setting the light in place, aligning holes, installing provided washers to fill gaps, and tightening the screws.
Cable Management: Users are instructed to route the connection cable along the length of the rack, securing it with cable ties. Special attention is required to route the cable away from and around pivot points on the bike rack to prevent pinching or damage.
Immediate Testing: After installation, it is crucial to connect the light to the vehicle's trailer connection and test all light functions (tail, brake, hazard, left, and right-hand turn signals) before driving. This ensures proper operation and safety.
License Plate Mounting: The design includes provisions for installing a license plate below the light using provided Phillips head or thumb screws.
Sticker Application: A Kody Sticker is provided for optional application on the bike, bike rack, or vehicle.
User Responsibility: Users are reminded that while the rack lights improve visibility, they are not a substitute for safe driving practices and adherence to all traffic laws. Regular verification of cable routing, connections, and light functionality is emphasized.

Maintenance Features:

Regular Verification: Users are advised to regularly verify cable routing and connections, and to test the light's function prior to driving. This proactive approach helps ensure continuous safe operation.
Troubleshooting Support: In case turn signals do not function correctly, users are directed to the "How to" page on the Kody Technologies website for LED Trailer Lights or to contact customer service.
Product Warranty: Kody Technologies provides a 1-year warranty covering any failure of the electronics or hardware. If issues arise within this period, customers can contact Kody for a replacement.
Return Policy: A 30-day hassle-free return policy is offered. If a customer is not 100% satisfied, they can return the light assembly in like-new condition for a replacement or refund. This policy also serves as a feedback mechanism for Kody to understand and address product issues, contributing to continuous product improvement.
Customer Support: Kody Technologies emphasizes open communication, encouraging users to contact them with any questions, ideas, or concerns via customerservice@kodytechnologies.com.

Disclaimer and Liability:

Kody Technologies LLC stresses the importance of reading and reviewing all information carefully before installation. The company assumes no liability for injury to persons, damage to property, loss of profit, or any other loss or damage caused by improper mounting or use of the carrier, including use in conflict with assembly instructions or any other instructions. They also do not assume responsibility or liability for accidents or injuries resulting from the use or misuse of this product. This highlights the user's responsibility to ensure correct installation and operation according to the provided instructions.