EasyManua.ls Logo

Koenic KAC 3232 - Settings, Timer, and Drainage

Koenic KAC 3232
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
English
The product is intended for the following
ambient temperatures:
Mode Temperature
AUTO
auto
17 °C (62 °F) - 35 °C (95 °F)
COOL 17 °C (62 °F) - 35 °C (95 °F)
DRY 13 °C (55 °F) - 35 °C (95 °F)
Warning
Any other conditions and locations as the
mentioned above may result in reduced
performance of the product, injuries and
damage to property.
Fig.
6
Setting the temperature
Press the / + or / – button to select a
temperature between 17 °C to 30 °C.
Fig.
7
Setting the fan speed
• Press the fan speed button FAN to toggle
between the speed settings.
• The respective indicator on the control panel
and the remote control show the current
setting.
Note:
There is no indicator for the auto speed
setting.
Fig.
8
Air outlet adjustment
The air outlet can be adjusted in any mode to
fit required needs.
• Press the oscillation button SWING
repetitively to turn oscillation on or o. The
air flap will oscillate continuously.
• To stop the air flap at a desired position
press button SWING again.
Note:
Do not move, open or shut the air flap
manually.
Mode Application
Sleep
mode
•set temperature
increases by 1 °C after
30 minutes and again
by 1 °C after another 30
minutes
•temperature will be kept
for the next 7hours and
the product returns then
to the previously set
temperature
•not available during fan
or dehumidifying mode
FOL-
LOW
ME
•This function can only
be activated via the
remote control. The
remote control serves
as a remote control
thermostat that allows
precise temperature
control at your location.
•To activate the Follow
Me function, point the
remote control at the
product and press the
Follow Me button.
•The remote control
displays the current
temperature at your
location. The remote will
send this signal to the
air conditioner every 3
minutes until you press
the Follow Me button
again.
•If the product does not
receive the Follow Me
signal within 7 minutes,
the product will exit the
Follow Me mode.
Note:
This feature is not
available in FAN or DRY
mode.
IM_KAC3232_KAC3352_181220_V04_HR.indb 47 20/12/18 4:15 pm

Related product manuals