Koenig bw1880 - TO CHANGE SPARE PARTS; A. Replace CO2 connector and seal washer

TO CHANGE SPARE PARTS
ACCESSORIES INCLUDED WITH YOUR BEER COOLER
Items Name Qty. Installment Picture
Spare
parts
1
Connector
seal
6
Regulator
valve
5pcs
2
CO2
connector
2
Regulator
valve
1pcs
3 Beer tube 2
Beer-out
connector
1pcs
4
Tube seal
circle
4 Beer-in pipe 3pcs
5 Keg seal 2
Standard
tub
2pcs
6
Heineken
adaptor
3
Heineken
tub
1set
7
CO2
cartridge
3
Regulator
valve
assembly
3pcs
8
Cleaning
bottle
1
1pcs
A. Replace CO2 connector and seal washer
CO2 connector and seal washer maybe damaged when wrong
usage or other reasons, please replace a new one.
1. Firstly, pick out the seal washer with a tiny metal stick (Show as
figure 31), and take out CO2 connector (if only replace the seal
washer, this step can be cancelled). Be careful not damage other
parts of regulator.
2. Install a new CO2 connector in the regulator (leave the sharp end
outside toward), and install the seal washer (Show as figure 32).
Don’t remove other parts of regulator in the replacing process.