Follow the below steps to clean leather and plastic parts
• Ensure the main switch is turned off and the power plug is unplugged from the
electrical outlet.
• Dip a soft, dry cloth in water or warm water containing 3% to 5% neutral
detergent and wring it thoroughly.
• Clean the leather and plastic parts.
• Then wipe with a dry soft cloth.
• Let it dry naturally.
Warning!
• Do not use alcohol, thinner, gasoline and other chemicals for cleaning.
• Do not dry the surface with a blower.
• Do not iron the fabric.
• During maintenance, always unplug the power plug. Do not unplug it by wet
hands.
• Use a dust cover to avoid dust if you won’t use the chair for a long time.
• As fabric’s colour may be dyed on the leather, be careful when using denim
and coloured cloth to wipe the product.
• Wipe the product with the melamine foam dipped in mild detergent if the dirt
is hard to remove.
• Do not let the leather touch plastic in case of the colour fading.
• Water temperature should not exceed 40 degrees.
Water temperature should
not exceed 40 degree
CLEANING & CARE
To Next Page
Loading...