4. Things to note about the power plug and cord
• Check that the Alternating Current (AC) voltage corresponds with the
specifications indicated for the massage chair.
• Do not connect or disconnect the power plug from the electrical outlet with wet
hands. This may result in malfunction or electric shock.
• When disconnecting the power plug, pull it by holding the plug, not the cord.
• Although operation will be stopped automatically by the Auto-Timer function,
always remember to switch off the main power switch after use.
• Do not place the power cord under the massage chair or any other heavy objects.
• Do not wind the power cord around the massage chair as this may damage the
cord and result in a fire or electric shock.
• Do not operate the massage chair with a damaged cord or extension cord.
• Do not use the massage chair if the electrical outlet is loose.
• If the power cord is damaged, it should be replaced by a qualified technician.
Grounding Instructions
This product must be grounded. If it should malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock. This product is
equipped with a cord having an equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed and grounded by
all local codes and ordinances.
Dander- Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the product
- if it will not fit the outlet; have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 100-240V~ circuit and has a grounding plug that looks
like the plug illustrated in sketch A as the following illustration. Make sure that the product is
connected to an outlet having the same configuration as the plug. No adapter should be
used with this product.
To Next Page
Loading...