Cleaning the Screens
Sprayhead Screen
Turn the handle to the closed position.
Disconnect the nut at the end of the spray hose.
Remove and clean the screen inside the spray hose.
Reinsert the screen and reconnect the spray hose.
Solenoid Inlet Screen
Turn the handle to the closed position.
Disconnect the outlet hose from the solenoid.
Remove and clean the inlet screen inside the solenoid.
Reinstall the inlet screen and reconnect the outlet hose.
Supply Hose Screen
Turn off the water supplies.
Disconnect the supply hose from the supply stop.
Remove and clean the screen inside the hose inlet.
Reinsert the screen and reconnect the supply hose to the stop.
Turn on the water supplies.
Supply Hose
Screen
Outlet Hose
Screen
Sprayhead
Screen
进水软管
滤网
滤网
出水软管
滤网
喷头
清洁滤网
喷头滤网
转动手柄至关闭位置
拆下花洒软管端部的螺母。
To Next Page
Loading...
Need help?
General
