Kohler C3-430 - Page 8

1349981-X2-A 8 Kohler Co.
Installation Inspection
1
3
2
The seat is designed to be
seat-on detection mode. A
wet towel shall be placed on
the right of the seat at the 1/3
position away from the front
end (sensing area).
 Plug power cord into socket. Bidet seat generates one shot beep, wand
extends and retracts once, and the indicator on the side panel blinks until
initialization completes.
 Turn on this product according to the "PREPARATIONS BEFFORE INITIAL
OPERATIONS" section of the Homeowners Guide.
 Continue to read the "USE GUIDE" section of the Homeowners Guide to
test functions of this product.