Kohler Chesapeake K-1728 - Technical Information and Notes; Product Dimensions and Specifications; Installation Guidelines

Chesapeake
™
Wall-Mount Bathroom Sink
K-1728
4"
(102 mm)
Standard Installation
31"
(787 mm)
13-3/4"
(349 mm)
10"
(254 mm)
1/4" (6 mm)
2" (51 mm)
8-1/8"
(206 mm)
4-1/2"
(114 mm)
Ø 1-1/4" (32 mm)
Locking Device Hole
17-1/4"
(438 mm)
2-1/2"
(64 mm)
6-1/2"
(165 mm)
Ø 1-1/4" (32 mm)
Leveling Screw Hole
Concealed Arm
Hole Locations
3-1/4" (83 mm)
8-1/2"
(216 mm)
13-3/4"
(349 mm)
15-3/8"
(391 mm)
19-1/4" (489 mm)
8-1/4"
(210 mm)
3/8" Cold
1-1/4" OD
29-1/2"
(749 mm)
30-1/4"
(768 mm)
3/8" Hot
4" (102 mm)
Recommended ADA Installation
34"
(864 mm)
Max
17-1/4" (438 mm)
8"
(203 mm)
Min
11" (279 mm)
32-1/8"
(816 mm)
9"
(229 mm)
Min
27"
(686 mm)
Min
L of Arm Carrier
C
Technical Information
All product dimensions are nominal.
Bowl configuration: Single
Center(s): 4
Bowl area (Only): Length: 14" (356 mm)
Width: 11" (279 mm)
Water depth: 4-7/16" (113 mm)
With overflow: Yes
Number of deck
holes:
3
Faucet hole spacing: 4" (102 mm)
Faucet hole(s): 1-1/4" (32 mm)
Drain hole: 1-3/4" (44 mm)
Notes
Install this product according to the installation
instructions.
ADA compliant when installed to the specific
requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-26-2023 20:07 - US/CA