Kohler Command PRO CV682 Service Manual

Specications
724 690 37 Rev. B KohlerEngines.com
TORQUE SPECIFICATIONS
3,5
CV682 CV732 CV742 CV752
Cylinder Head
Fastener (torque in 2 increments)
Nut rst to 16.9 N·m (150 in. lb.)
nally to 35.5 N·m (315 in. lb.)
Bolt (torque in 2 increments) rst to 22.6 N·m (200 in. lb.)
nally to 41.8 N·m (370 in. lb.)
Rocker Arm Screw 18.1 N·m (160 in. lb.)
Flywheel
Fan Fastener 9.9 N·m (88 in. lb.)
Flywheel Retaining Screw 66.4 N·m (49 ft. lb.)
Fuel Pump-Pulse
Fastener 2.3 N·m (20 in. lb.)
Governor
Lever Nut 6.8 N·m (60 in. lb.)
Ignition
Spark Plug 27 N·m (20 ft. lb.)
Module Fastener 4.0-6.2 N·m (35-55 in. lb.)
Rectier-Regulator Fastener 1.4 N·m (12.6 in. lb.)
Mufer
Retaining Nut 24.4 N·m (216 in. lb.)
Oil Cooler
Adapter Nipple 27 N·m (20 ft. lb.)
Oil Pan
Fastener 24.4 N·m (216 in. lb.)
Oil Pump
Screw (no torque sequence) 9.0 N·m (80 in. lb.)
Oil Sentry
™
Pressure Switch 4.5 N·m (40 in. lb.)
Solenoid (Starter)
Mounting Hardware 4.0-6.0 N·m (35-53 in. lb.)
Nut, Positive (+) Brush Lead 8.0-11.0 N·m (71-97 in. lb.)
Speed Control Bracket
Hi-Lo Screw into Blower Housing 2.2 N·m (19 in. lb.)
Starter Assembly
Thru Bolt 5.6-9.0 N·m (49-79 in. lb.)
Mounting Screw 15.3 N·m (135 in. lb.)
Brush Holder Mounting Screw 2.5-3.3 N·m (22-29 in. lb.)
3
Values are in Metric units. Values in parentheses are English equivalents.
5
Lubricate threads with engine oil prior to assembly.

Kohler Command PRO CV682 Specifications

General

Brand	Kohler
Model	Command PRO CV682
Category	Engine
Language	English