Kohler K-10550 - Install the Tissue Holder; Install the Towel Ring

6. Install the Tissue Holder
NOTE: This toilet tissue holder may be installed horizontally or
vertically. Position the wall plate accordingly.
Start a setscrew into the setscrew hole in each post. Do not thread
fully into the post.
Position the escutcheons, if included, onto the wall plates.
NOTE: The escutcheons are loose until the posts are in place and the
setscrews are tightened.
Install the tissue holder post onto the wall plate.
Tighten each setscrew.
Insert the spindle into the tissue holder assembly.
7. Install the Towel Ring
Start the setscrew into the setscrew hole in the post. Do not
thread fully into the post.
Position the escutcheon, if included, onto the wall plate.
Install the towel ring post onto the wall plate.
Tighten each setscrew.
NOTE: The escutcheons are loose until the posts are in place and the
setscrews are tightened.
Tissue Holder
Anchors
Screws
Wall Plate
Large
Mounting
Hole
Escutcheon
Setscrew
Tissue
Holder
Anchors
Wall Plate
Screws
Large
Mounting
Hole
Escutcheon
Towel Ring
Towel Ring
Setscrew
1023327-2-B 6 Kohler Co.