Kohler K-10550 - Install the Towel Bar

8. Install the Towel Bar
Start a setscrew into each post. Do not thread fully into the post.
If included, place an escutcheon on both the left and right side
wall plates.
NOTE: The escutcheons are loose until the posts are in place and the
setscrews are tightened.
Align the towel bar assembly over the wall plates. Slide the
assembly onto the wall plates.
Tighten the setscrews with a hex wrench.
Towel Bar
Anchors
Screws
Wall Plate
Towel Bar
Escutcheon
Setscrew
Large Mounting Hole
Double Towel Bar
Anchors
Screws
Wall Plate
Escutcheon
Setscrew
Large Mounting Hole
Double
Towel Bar
Kohler Co. 7 1023327-2-B