Kohler K-168 Installation Guide

3. Install the Handspray
Slide the gasket (provided) onto the spray holder.
Slide the spray holder through the mounting hole from above.
Hand tighten the nut from under the sink.
Insert the spray hose through the spray holder.
Attach the spray hose to the spray inlet connector using thread
sealant.
Spray
Holder
Mounting
Hole
Spray Inlet
Connector
Nut
Gasket
Handspray
Spray Hose
Kohler Co. 5 1015073-2-D

Kohler K-168 Specifications

General

Brand	Kohler
Model	K-168
Category	Plumbing Product
Language	English