To Next PageTo Next PageHow to fix a Kohler toilet with a weak flush?
If your Kohler toilet has a poor flush, try these solutions: Adjust the tank water level to match the waterline. Ensure the water supply shut-off valve is fully open. Check for and clear any obstructions in the trapway, jet, or bowl rim holes. Also, inspect the soil pipe or vent pipe for any blockages and clear them.
Why does my Kohler toilet take so long to fill?
If your Kohler toilet has a long tank fill cycle, make sure the water supply shut-off valve is fully open. Additionally, clean the fill valve inlet, valve head, or supply line. You may also need to flush the lines.
What to do if my Kohler toilet is making noise when filling?
If your Kohler toilet's tank fill cycle is noisy, try partially closing the water supply shut-off valve if the water pressure to the toilet is too high. You can also remove any dirt or obstruction in the valve head. Flushing the lines might also help.
Why does the Kohler toilet trip arm strike the tank lid underside?
If the trip arm of your Kohler toilet is striking the underside of the tank lid, adjust the flush ball chain assembly to remove excessive slack. You can also adjust the trip arm bracket and flange so they are parallel with the tank top.
General| Bowl Height | Comfort Height |
|---|---|
| Flush Type | Classic Six |
| Gallons Per Flush | 1.6 |
| Material | Vitreous China |
| Rough-in | 12 inches |
| Type | Two-piece toilet |
| Water Consumption | 1.6 gallons per flush |
