7. Checkout Installation
Position a large plastic washer on each side of the pulley.
Fit the pulley over the spray hose, then inside the channel.
Install a plastic cover to each side of the channel.
Secure the plastic covers together with a bolt, washer, and wing
nut.
Hand tighten the wing nut onto the bolt. Do not overtighten.
Pull the sprayhead out of the spout several times to verify
smooth, unrestricted spray hose movement.
Channel
Spray Hose
Pulley
Wing Nut
Washer
Bolt
Large Washer
Large Washer
Cover
1025493-2-B 8 Kohler Co.
To Next Page
Loading...
