Remote Control Operation (cont.)
J - Pulsate + Oscillate:
When front or rear wash is active, press the ″Pulsate + Oscillate″
icon once to oscillate the wand back and forth. Press again to
pulsate the water flow. Press a third time to oscillate and pulsate
simultaneously. Press again to turn off the feature.
K - Rear:
Press the ″Rear″ icon to activate the rear wash feature and adjust
the rear wash water pressure.
L - Front:
Press the ″Front″ icon to activate the front wash feature and
adjust the front wash water pressure.
M - Stop:
Press the ″Stop″ icon to stop the front wash, rear wash, and dryer
features.
N - Rear:
Press the ″Rear″ icon to activate the rear wash feature and adjust
the rear wash water pressure.
P - Front:
Press the ″Front″ icon to activate the front wash feature and
adjust the front wash water pressure.
Q - Stop:
Press the ″Stop″ icon to stop the front wash, rear wash, and dryer
features.
Setting the User Presets
NOTE: The presets allow two users to save their feature settings.
When ″Preset 1″ or ″Preset 2″ are selected, the saved preferences
will activate.
While seated, adjust the seat features to your preferences.
Press and hold the ″Preset 1″ or ″Preset 2″ icon for 3 seconds to
save activated features at the current settings.
To change a setting, adjust the front wash, rear wash, or dryer
feature while the preset is in use. Press and hold the ″Preset 1″ or
″Preset 2″ icon for 3 seconds to store the new setting to memory.
Using the User Presets
Kohler Co. 9 1381632-5-A
To Next Page
Loading...
Need help?
General
