Kohler KINGSTON K-4325 - Sloan Royal Flushometer Parts and Maintenance Guide; Parts List

Royal
®
Flushometer
Repair Parts and Maintenance Guide
2.1.1
PARTS LIST
Item
No. Code No. Part No. Description
1. 0301172 A-72 CP Cover
2. 0301168 A-71 Inside Cover
3. — Dual Filtered Diaphragm
™
Assembly
(refer to table and diagram on following page)
4. 0302390 B-73-A CP ADA-Compliant Triple Seal Handle Assembly
5. 0301082 A-6 CP Handle Coupling
6. 0302109 B-7-A CP Socket Assembly
7. 0302389 B-74-A CP ADA-Compliant Handle
8. 3302306 B-51-A Triple Seal Handle Repair Kit
9. 5301139 A-31 Handle Gasket – 48 per package
10. 0306125 F-5-AW 3/4” (19 mm) CP Spud Coupling Assembly
0306140 F-5-AU 1-1/4” (32 mm) CP Spud Coupling Assembly
0306146 F-5-AT 1-1/2” (38 mm) CP Spud Coupling Assembly
11. 3323182 V-651-A High Back Pressure Vacuum Breaker Repair Kit
12. 3393004 V-600-AA 3/4” (19 mm) x 9” (228 mm) CP Vacuum Breaker
3393006 V-600-AA 1-1/4” (32 mm) x 9” (228 mm) CP Vacuum Breaker
3393007 V-600-AA 1-1/2” (38 mm) x 9” (228 mm) CP Vacuum Breaker
13. 0308676 H-550 CP Stop Coupling
14. 0308801 H-551-A CP Adjustable Tailpiece 2-1/16” (52 mm long)
Standard Length*
15A. 5308696 H-553 O-ring – 24 per package
15B. 5308381 H-552 Locking Ring – 12 per package
16. 3308386 H-700-A 1” (25 mm) CP Bak-Chek
®
Screwdriver Stop
3308384 H-700-A 3/4” (19 mm) CP Bak-Chek
®
Screwdriver Stop
17. 3308853 H-541-ASD Control Stop Repair Kit
†
3308856 H-543-ASD Control Stop Repair Kit
‡
18. 0308612 H-622 CP Bonnet
†
0308843 H-577 CP Bonnet
‡
19. 3308772 H-1010-A Vandal Resistant Control Stop Cap Assembly
†
3308790 H-1009-A Vandal Resistant Control Stop Cap Assembly
‡
20. 0308738 H-573 Control Stop Cap CP
†
0308848 H-582 Control Stop Cap CP
‡
21. 3308866 H-574 Control Stop Cap with Bumper
†
(–YO Variation)
22. 3308867 H-576 Control Stop Cap with Extended Bumper
†
(–YG Variation)
* See page 4.2.1 for additional lengths
† For use with 1” and 3/4” H-700-A and 1” H-600-A Bak-Chek
®
screwdriver control stop
‡ For use with 3/4" H-600-A Bak-Chek
®
screwdriver control stop
Sloan products are also available in satin, brushed nickel, chrome, gold and polished brass finishes – contact
factory for part numbers.
TAILPIECES, CONTROL STOPS AND FLUSH CONNECTIONS
For additional information on tailpieces, control stops and flush
connections see Section 4.
tailpiece
control stop and caps
Valve Body
(not sold separately)
082009