1032343-2-A
Kohler Co.
Français, Page 7
Español, Página 13
R
TROCADERO
SINGLE CONTROL
LAVATORY AND BIDET FAUCET
1. BEFORE YOU BEGIN
HOW TO USE THESE INSTRUCTIONS
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will aid you in avoiding the
unnecessary expense associated with improper
installation. In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based on the latest
product information available at the time of publication.
Kohler Co. reserves the right to make changes in product
characteristics, packaging, or availability at any time
without notice.
NOTES
S If supply tubes must be cut, allow for required
penetration into shut-off valve.
S Shut off main water supply.
S Observe all local plumbing codes.
S Carefully inspect waste and supply tubing for any
sign of damage. Replace if necessary.
S ** Variation and/or finish/color code may be
required when ordering.
ORDERING INFORMATION
Single control lavatory and bidet faucet
with drain K-15000................................
Optional escutcheon K-167........................
PRODUCT REQUIREMENTS
Minimum water supply pressure: 7.5 psi
Recommended water supply pressure: 15-75 psi
Install pressure regulator beyond 75 psi.
FOR NEW INSTALLATIONS
S Assemble faucet and drain to fixture before installing
fixture.
TOOLS AND MATERIALS REQUIRED
S Adjustable or open end wrench
S Plumbers putty
S Thread sealant
S Tubing cutter
S 2.5 mm and 3 mm metric hex wrenches
OPTIONAL TOOLS AND MATERIALS
S Pipe wrench
S Pliers
S Supply tubes
S Shut-off valves
S Trap
S Drain
To Next Page
Need help?
General
