Kohon KH-01 Series User Manual

KH-01 Series 3D Printer
M a n u a l
M a n u a l
M a n u a l
I n s t r u c t i o n
I n s t r u c t i o n
I n s t r u c t i o n
 The manual is made according to KH-01 standard specification,
and also applicable to all KH-01/KH-02/KH-03/KH-04/KH-05 Series.
 Take practicality as standard of appearances and interfaces
because of software & hardware upgrades.
 Detailed operation instructions are available in the SD card.

Kohon KH-01 Series Specifications

General

Filament Diameter	1.75mm
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Nozzle Diameter	0.4 mm
Supported Materials	PLA, ABS, TPU
Connectivity	USB
Bed Temperature	Up to 100°C
Display	LCD