Koike PNC-12 EXTREME - User Manual

PNC-12 EXTREME
Portable CNC Cutting Machine
Operation Manual – Version T30003406
For every person who will be engaged in operation and maintenance
supervision, it is recommended to read through this manual before any
operations, so as to permit optimum operation of this machine.

Summary

INTRODUCTION

SAFETY PRECAUTIONS

Critical safety instructions and warnings for operating the machine.

Safety Information

General Machine Safety

Covers machine handling, electrical safety, and maintenance protocols.

Gas Cutting Safety Precautions

Essential safety measures for gas cutting operations, including fire and explosion prevention.

Machine Installation

Installation Overview and Component Check

Assembly Procedures

Installation of Plasma Cutting

Step 1: Replace Torch Unit

Procedure for removing oxy-fuel components before plasma unit installation.

Steps 2 & 3: Controls and Cables

Guidance on installing arc voltage control and connecting control cables.

Machine Maintenance and Preservation

Cleaning and Lubrication

Procedures for regular cleaning and lubrication of machine parts.

Adjustment and Nozzle Cleaning

Operation Procedures of CNC Cutting Machine

Pre-Operation Checks

Post-Operation Procedures

Daily Maintenance and Safety

CUTTING DATA

Acetylene Cutting Data

Cutting parameters for standard and high-speed acetylene gas based on steel thickness.

106 (Standard Speed) Propane

106-D7 (High-speed) Propane

WIRING DIAGRAM

Wiring Diagram Details

Koike PNC-12 EXTREME Specifications

General

Model	PNC-12 EXTREME
Manufacturer	Koike
Category	Cutter
Torch Type	Plasma or Oxy-Fuel
Cutting Capacity (Mild Steel)	Up to 25 mm
Cutting Method	Plasma or Oxy-Fuel
Power Supply	AC 220V, 50/60 Hz
Rated Output Current	Depends on plasma source
CNC Control	Yes
Torch Height Control	Automatic