FILLING THE WATER TANK
1. Extract the tank by pulling it upwards (fig. 1).
2. Open the lid and fill the tank with fresh clean water, taking care not
to exceed the MAX level (fig. 2).
3. Put the tank back in the appliance, pressing lightly to open the valves
located on the bottom of the tank(fig. 3).
4. Alternatively,the tank can also be filled without extracting it by pouring
the water directly from a jug(fig. 4)
A IMPORTANT
Never operate the appliance without water in the tank or without the tank.
Fig. I
Fig. 4
Fig. 2
6
Fig. 3
To Next Page
Loading...