Need help?Do you have a question about the KOKKO MINI PEDAL and is the answer not in the manual?
General| Input | 1/4" mono audio jack |
|---|---|
| Output | 1/4" mono audio jack |
| Type | Guitar Effects Pedal |
| Power supply | 9V DC |
| Effect | Overdrive |
| Controls | Gain, Tone, Level |
| Battery Type | No battery compartment |
Identifies and explains the pedal's interface elements like power, output, and input jacks.
Describes the LED indicator and the on/off foot switch.
Lists input/output impedance and power supply requirements.
Advises on operating environment and handling to prevent damage.
Explains the Drive, Level, and Tone knobs and the pedal's overall sound.
Provides weight and dimensions for the Overdrive pedal.
Explains the Drive, Level, and Tone knobs and the pedal's overall sound.
Provides weight and dimensions for the Supa Drive pedal.
Explains knobs (Time, Mix, F.Back) and the Tap Mode for delay speed adjustment.
Information on bypass modes and a general overview with specs.
Explains the Reverb knob and bypass mode selection.
General overview, weight, and dimensions of the Space pedal.
Adjusting loop volume and a quick guide to recording and playback.
Details on overdubbing and undoing recorded loops.
Describes how to redo undone loops and erase recorded loops.
Explains how loops are automatically saved and restored.
Explains Bass, Drive, and Treble knobs and provides a general overview.
Provides weight and dimensions for the Booster pedal.
Explains Speed, Mix, Depth knobs and bypass mode selection.
General overview, weight, and dimensions of the Chorus pedal.
Explains Sustain, Attack, Level knobs and provides a general overview.
Provides weight and dimensions for the Compressor pedal.
Explains Tone, Gain, Level knobs and provides a general overview.
Provides weight and dimensions for the Distortion pedal.
Explains Rate, Mix, Depth knobs and provides a general overview.
Provides weight and dimensions for the Phaser pedal.
Explains Rate, Level, Depth knobs and provides a general overview.
Provides weight and dimensions for the Vibe pedal.
Explains Rate, Ramp, Depth knobs and footswitch modes.
General overview, weight, and dimensions of the Vibrato pedal.
Identifies and labels the parts of the Tuner pedal.
Lists tuning modes, range, precision, and power requirements.
Explains connection, bypass mode, and switching between Normal/Strobe displays.
Describes LED behavior for Flat, In Tune, and Sharp in Normal and Strobe modes.
Details how to set and adjust flat tuning on the Tuner.
Explains setting the A4 reference and displays tuning outcomes.
Identifies and labels the controls and jacks on the Mini Looper.
Explains the function of each control on the Mini Looper's panel.
Advises on power, connections, and avoiding radio interference.
Provides advice on suitable locations and highlights main characteristics.
Details the steps for various operations like recording, playback, and stopping the loop.
Lists loop length, overdubs, connector types, and power input.
To Next Page