Kokoon Relax User Manual

Quick start Guide
Connecting your headphones for the first
time
1
Connect the headphones to a power source,
using the micro USB cable provided.
LED will flash green when charging. Ensure
headphones are fully charged before use.
The LED Indicator
The Kokoon Relax headphones include an LED indicator, located above the power button. This
indicator will show either a solid light or flash, for a short period, whenever you perform an
action with the headphones.
______________________________________________________________________________
Flashing LED:
White
Headphones turning off
Green
Charging
Blue
Pairing mode (ready to pair with a new device)
Purple
Active Noise Cancellation off

Kokoon Relax Specifications

General

Brand	Kokoon
Model	Relax
Category	Headphone
Language	English

Summary

Connecting Your Headphones for the First Time

Initial Charging Procedure

Connect headphones to a power source using the micro USB cable. The LED will flash green when charging.

Understanding the LED Indicator

Details the LED indicator's behavior, including flashing states for turning off, charging, pairing, and ANC off.

Solid LED Indicator States

LED Status for Power and Battery

Describes solid LED colors: white for turning on, green for battery over 75% or fully charged, amber for under 75%, red for low battery.

LED Status for Connectivity

Details solid LED colors: blue for headphones connected to phone, purple for Active Noise Cancellation on.

Turning On Headphones

Power Button Operation

Hold the power button located above the left ear cup for 1 second to turn headphones on. The LED will show solid white.

Pairing Headphones with a Device

Initiating Pairing Mode

Hold the action button for 3 seconds to enter pairing mode. The LED will flash blue, indicating readiness to connect.

Bluetooth Connection Steps

Turn on Bluetooth on your phone, select 'Kokoon Relax' in settings. Once connected, the headphone's LED will show on the Bluetooth menu.