What to do if my Koldfront PAC1402W is leaking?
If your Koldfront Portable air conditioner is leaking, check if the drain plug is removed and attach it. If the base pan is cracked, contact customer service.
Why is my Koldfront PAC1402W not cooling at all?
If your Koldfront Portable air conditioner isn't cooling, ensure it's in cooling mode and that you've set the temperature lower. The compressor can take up to 3 minutes to start, possibly longer if it's very warm. Also, ensure the room temperature is below 90°F. Check if the filter is dusty or blocked and clean it. Lastly, make sure the exhaust port isn't blocked by anything.
Why does my Koldfront PAC1402W blow cold air, but not lower the room temperature?
If your Koldfront Portable air conditioner blows cold air but doesn't lower the room temperature, make sure the unit is vented. Reduce the area you're trying to cool, perhaps by adding a drop ceiling, or consider using multiple units or a larger unit. Close any open doors or windows, and remove or shut off additional heat sources. Ensure the room is properly insulated and that the room temperature isn't above 90°F. Close curtains or blinds to minimize direct sunlight. Clean or replace the filter if it's dusty, vacuum the condenser coils, and clear any obstructions from the air intake or exhaust ports.
Why is my Koldfront PAC1402W Portable air conditioner making a loud noise?
If your Koldfront Portable air conditioner is making a loud noise, ensure it's on a level surface. If not, adjust its position. Also, check for and remove any foreign objects that may have jammed the fan. If the floor is uneven, move the unit to a level surface.
Why does my Koldfront PAC1402W remote control not work?
If your Koldfront Portable air conditioner remote control isn't working and the indicator light is off, first, install new batteries. If batteries are already installed, replace them with new ones. Ensure the batteries are correctly installed. If the issue persists, the remote control may be defective, and you should contact customer service.
What to do if my Koldfront Portable air conditioner trips the power cord?
If your Koldfront Portable air conditioner runs briefly and then trips the power cord or circuit breaker, it might be plugged into an outlet that can't supply enough current. If the unit works in a different room or circuit, contact an electrician.
Why is my Koldfront PAC1402W Portable air conditioner making a metallic sound?
If your Koldfront Portable air conditioner is making a continuous metallic knocking or pinging sound, it may have been shipped on its side. Shut it off and let it sit on a level surface for at least 24 hours before restarting it. If the sound persists, the compressor might be damaged, and you should contact customer service.
What does it mean if the control panel lights blink randomly on my Koldfront Portable air conditioner?
If the control panel lights on your Koldfront Portable air conditioner are blinking randomly, the unit may have a faulty control panel, and you should contact customer service.
General| Cooling Capacity | 14, 000 BTU |
|---|---|
| Power Supply | 115V/60Hz |
| Coverage Area | Up to 500 sq. ft. |
| Fan Speeds | 3 |
| Digital Thermostat | Yes |
| Remote Control | Yes |
| Window Kit | Included |
| Refrigerant | R-410A |
| Voltage | 115V |
| Dehumidification | 71 pints per day |
| Dimensions | 15.75 inches |
| Operating Temperature | 62°F |
Safety guidelines for electrical aspects of the unit, including usage and power supply.
General safety precautions for using the portable air conditioner, focusing on user and appliance safety.
Explains the purpose and testing procedure for the Leakage-Current Detection and Interruption (LCDI) safety plug.
Section to record model, serial number, and purchase date for warranty and service reference.
Identifies the parts and features visible from the front of the portable air conditioner unit.
Identifies the parts and features visible from the back of the portable air conditioner unit.
Lists all the components included in the window exhaust kit for installation.
Guidelines for choosing a suitable and safe placement for the portable air conditioner.
Instructions for preparing the window slider kit panels for window installation.
Attaching the foam seal to the window sill and frame for proper sealing.
Attaching and adjusting the window slider kit to fit the window opening.
Attaching foam seal to the window sill and frame for sliding windows.
Attaching and adjusting the window slider kit for sliding window installation.
Sealing the gap between window sashes using foam seal for optimal performance.
Using a security bracket to prevent the window sash from being opened.
Connecting the necessary adapters to the flexible exhaust hose.
Positioning the unit at the installation location with proper ventilation clearance.
Attaching the exhaust hose to the air outlet on the back of the unit.
Securing the exhaust hose adapter through the window kit hole.
Recommendations for optimal exhaust hose performance, length, and routing.
Guidance on when to install or remove the exhaust hose based on operating modes.
Instructions for setting up continuous drainage using the provided drain hose.
Procedure for manually draining the unit when the internal reservoir is full.
Details the function of each button on the portable air conditioner's control panel.
Describes what the LED display shows, including temperature, errors, and codes.
Explains the indicator lights for Auto, Cool, Dry, and Fan modes.
How to operate the unit in cooling mode, including temperature and fan speed selection.
How to operate the unit in dry (dehumidify) mode.
How the unit automatically selects cooling or fan based on ambient temperature.
How to operate the unit in fan-only mode, adjusting fan speed.
How to use the power button for turning the unit on/off and auto-restart.
How to activate and use the louver swing feature for air direction.
How to set auto-on and auto-off timer programs for the unit.
How to use the Sleep/ECO mode for energy saving during rest.
Using Increase/Decrease buttons to adjust temperature settings or timer.
Explanation of the fan speed indicator lights for selected settings.
Diagram and overview of the remote control buttons and their general functions.
Detailed explanation of each button's function on the remote control.
Using the remote for power control and selecting operating modes.
Using the remote to adjust fan speed and activate sleep mode.
Using the remote to control louver swing and the LED display.
Using the remote for timer settings and the shortcut feature.
Instructions for installing or replacing AAA batteries in the remote control.
Explanation of error codes (E1-E4) that may appear on the unit's LED display.
Explanation of protection codes (P1) related to unit status on the LED display.
How to clean the exterior body, vents, and condenser coils of the air conditioner.
Step-by-step guide for cleaning the air conditioner's removable pre-filter.
Steps to follow before storing the unit for an extended period to ensure proper preservation.
Recommendations for optimizing unit performance and reducing energy consumption.
Solves issues related to the unit not powering on when the button is pressed.
Addresses problems with the air conditioner not working or cooling as expected.
Solves problems with the remote control not working or the indicator light not turning on.
Addresses causes and solutions for loud or unusual noises from the unit.
Solves problems related to the air conditioner leaking water.
Addresses issues where the unit trips the power cord or circuit breaker.
Solves issues with the control panel lights blinking erratically.
Explains why no air may be coming from the left side vent of the air conditioner.
Addresses issues where the unit is not cooling effectively or lowering room temperature.
Solves problems where cold air is blown but room temperature is not reduced.
Explains the cause of a gurgling sound, often related to refrigerant flow.
Lists key technical specifications like model, voltage, power, dimensions, and weight.
Details labor and parts covered under the one-year limited warranty.
Lists exclusions and limitations of the warranty coverage as per terms.
Instructions on how to contact support and obtain warranty service.
To Next Page