Need help?Do you have a question about the Kole Audio TRAX4-1600 and is the answer not in the manual?
Connect amplifier ground to a clean, bare metal surface of the vehicle's chassis.
Connect fused +12V constant power directly to the battery positive terminal.
Connect to the car stereo's remote turn-on output or a switchable +12V.
Configures amplifier as master or slave for linked configurations.
General| Channels | 4 |
|---|---|
| Total Harmonic Distortion (THD) | <0.05% |
| Signal-to-Noise Ratio | >90dB |
| Frequency Response | 20Hz - 20kHz |
| Input Sensitivity | 200mV - 6V |
| Crossover Frequency | 50Hz - 250Hz |
| Fuse Rating | 25A x 2 |
| Bass Boost | 0dB / +6dB / +12dB |
| Peak Power | 1600W |
| Impedance | 2-4 Ohms |
| Dimensions | 12.6" x 9.4" x 2.2" |
| Crossover Type | Variable High-Pass/Low-Pass |
To Next Page