KOLINK Unity Peak ARGB - User Manual

Power Connection
UNITY PEAK ARGB
ARGB INSTALLATION MANUAL
Included in the package: ARGB fan
hub controller, remote control.
Connect up to 6 fans to the ARGB fan hub controller. 4 fans are pre-installed. Connect additional fans to the free PWM headers. Connect the
PWM signal cable to a free mainboard PWM fan header (e.g. CHA_FAN1) to control the fan speed via the mainboard. Connect the SATA power
cable to a free SATA power connection on your PSU.
Note: Only use the PWM headers of the ARGB fan hub controller to control fans. AIO pumps require PWM headers with constant 12V from
your mainboard.
www.kolink.eu Page 1/2
FAN1 FAN2 FAN3 FAN4 FAN5 FAN6
Fan
PWM Cable
SATA Power Cable:
→ Connect to PSU
PWM Signal Cable:
→ Connect to MB
Mainborad
PWM Header

KOLINK Unity Peak ARGB Specifications

General

Brand	KOLINK
Model	Unity Peak ARGB
Category	Enclosure
Language	English