EasyManua.ls Logo

Kolpin Matrix Seat Bag - User Manual

Kolpin Matrix Seat Bag
11 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Kolpin Matrix Seat Bag:
Assembly and Installation on Polaris Sportsman 570 & Sportsman ETX
Assembly Steps:
1. For the left side, first
locate the five velcro
straps; one on the side
bag (labeled in picture as
L1), four on the middle
bag (labeled in picture as
M1, M2, M3, M4)
Notes:
• Direction is indicated
when sitting on ATV
facing towards the front.
• Blue masking tape is used
to identify straps for
assembly and installation.
The bag will not come
with labeled straps.
Towards front
of ATV
L1
M1
M2
M3
M4
1
Question and Answer IconNeed help?

Do you have a question about the Kolpin Matrix Seat Bag and is the answer not in the manual?

Summary

Kolpin Matrix Seat Bag Assembly

Step 1: Locate Assembly Velcro Straps

Locate five velcro straps: one on the side bag and four on the middle bag for assembly.

Step 2: Attach Side Bag Velcro Strap

Attach the side bag's velcro strap through the middle bag's loop as illustrated.

Step 3: Attach Middle Bag Straps Under Backrest

Connect middle bag velcro straps, located under the backrest pad, through side bag loops.

Step 4: Attach Middle Bag Straps to Backside

Fasten middle bag velcro straps found on the backside through the side bag loops.

Step 5: Repeat Assembly for Right Side

Complete the assembly process by repeating the same steps for the right side of the bag.

Kolpin Matrix Seat Bag Installation

Step 1: Identify Buckle Straps for Rack

Locate the buckle straps on the bag's underside that secure it to the vehicle rack.

Step 2: Position Bag on Rear Rack

Place the fully assembled seat bag onto the rear rack of the ATV as depicted.

Step 3: Feed Left Side Bag Strap

Feed the left side bag strap through the rack grab bar and buckle as shown.

Step 4: Feed Two Left Side Rear Straps

Thread the two left side rear bag straps through the rack grab bar and buckle.

Step 5: Feed Two Right Side Rear Straps

Thread the two right side rear bag straps through the rack grab bar and buckle.

Step 6: Feed Right Side Bag Strap

Feed the right side bag strap through the rack grab bar and buckle as shown.

Step 7: Feed Front Right Bag Strap

Feed the front right bag strap through the rack grab bar and buckle as shown.

Step 8: Feed Middle Bag Straps Under Seat

Feed the two middle bag straps under the seat pad through the rack grab bar and buckle.

Step 9: Feed Front Left Bag Strap

Feed the front left bag strap through the rack grab bar and buckle as shown.

Step 10: Final Securement and Adjustments

Secure the bag with ten buckle straps, adjusting for a tight fit to the vehicle.

Summary

Kolpin Matrix Seat Bag Assembly

Step 1: Locate Assembly Velcro Straps

Locate five velcro straps: one on the side bag and four on the middle bag for assembly.

Step 2: Attach Side Bag Velcro Strap

Attach the side bag's velcro strap through the middle bag's loop as illustrated.

Step 3: Attach Middle Bag Straps Under Backrest

Connect middle bag velcro straps, located under the backrest pad, through side bag loops.

Step 4: Attach Middle Bag Straps to Backside

Fasten middle bag velcro straps found on the backside through the side bag loops.

Step 5: Repeat Assembly for Right Side

Complete the assembly process by repeating the same steps for the right side of the bag.

Kolpin Matrix Seat Bag Installation

Step 1: Identify Buckle Straps for Rack

Locate the buckle straps on the bag's underside that secure it to the vehicle rack.

Step 2: Position Bag on Rear Rack

Place the fully assembled seat bag onto the rear rack of the ATV as depicted.

Step 3: Feed Left Side Bag Strap

Feed the left side bag strap through the rack grab bar and buckle as shown.

Step 4: Feed Two Left Side Rear Straps

Thread the two left side rear bag straps through the rack grab bar and buckle.

Step 5: Feed Two Right Side Rear Straps

Thread the two right side rear bag straps through the rack grab bar and buckle.

Step 6: Feed Right Side Bag Strap

Feed the right side bag strap through the rack grab bar and buckle as shown.

Step 7: Feed Front Right Bag Strap

Feed the front right bag strap through the rack grab bar and buckle as shown.

Step 8: Feed Middle Bag Straps Under Seat

Feed the two middle bag straps under the seat pad through the rack grab bar and buckle.

Step 9: Feed Front Left Bag Strap

Feed the front left bag strap through the rack grab bar and buckle as shown.

Step 10: Final Securement and Adjustments

Secure the bag with ten buckle straps, adjusting for a tight fit to the vehicle.

Overview

  1. Function Description
  2. Important Technical Specifications
  3. Usage Features
  4. Assembly Features
  5. Installation Features
  6. Maintenance Features

The Kolpin Matrix Seat Bag is a storage accessory designed for assembly and installation on Polaris Sportsman 570 and Sportsman ETX ATVs. It consists of a central bag and two side bags, all made of a durable black fabric material. The bag system is secured to the ATV's rear rack using a series of velcro and buckle straps.

Function Description:

The primary function of the Kolpin Matrix Seat Bag is to provide additional storage capacity for ATV riders. It is designed to be mounted on the rear rack of compatible Polaris Sportsman models, offering a secure and organized way to carry gear and essentials during rides. The multi-bag design allows for segregation of items, and the robust strap system ensures the bag remains firmly in place even over rough terrain.

Important Technical Specifications:

The manual does not provide specific technical specifications such as dimensions, material composition, or weight capacity. However, it highlights the use of velcro and buckle straps for secure attachment. The bag system is composed of a main middle bag and two side bags, suggesting a modular design. The straps are labeled (L1-L4, M1-M7, R1-R4) in the installation instructions, indicating a comprehensive attachment system.

Usage Features:

  • Modular Design: The bag system comprises a central bag and two side bags, allowing for flexible storage options and potentially the ability to use parts of the system independently if desired (though the instructions focus on full assembly).
  • Secure Attachment: The bag utilizes a combination of five velcro straps (one on each side bag, four on the middle bag) for initial assembly and ten buckle straps for final installation onto the ATV rack. This dual-system approach ensures a very secure fit.
  • Directional Guidance: The instructions emphasize that "direction is indicated when sitting on ATV facing towards the front," which is crucial for correct assembly and installation.
  • Easy Identification of Straps: For instructional purposes, blue masking tape is used to label the straps (e.g., L1, M1, R1). While the actual product will not have these labels, the clear labeling in the manual aids in understanding the assembly process.
  • Compatibility: Specifically designed for Polaris Sportsman 570 and Sportsman ETX models, ensuring a tailored fit.
  • Warning Label: The product includes a warning that it "is not a seat to be used by a passenger on an ATV" and "is only to be used when removed from the vehicle." This clarifies its intended use as a storage device, not a passenger seat.

Assembly Features:

The assembly process involves connecting the side bags to the middle bag using velcro straps.

  1. Left Side Assembly:
    • Locate five velcro straps: one on the left side bag (L1) and four on the middle bag (M1, M2, M3, M4).
    • Attach the side bag velcro strap (L1) through the loop on the middle bag.
    • Attach middle bag velcro straps M1 and M2 (located underneath the backrest pad) through loops on the side bag.
    • Attach middle bag velcro straps M3 and M4 (located on the backside of the bag) through loops on the side bag.
  2. Right Side Assembly: Repeat the same steps for the right side of the bag. Once assembled, the bag forms a cohesive unit ready for installation.

Installation Features:

The installation process involves securing the assembled bag system to the ATV's rear rack using buckle straps.

  1. Strap Identification: Locate all buckle straps on the underside of the bag (L1, L2, L3, L4, M1, M2, M3, M4, M5, M6, M7, R1, R2, R3, R4). These straps are used to secure the bag to the vehicle rack.
  2. Placement: Place the assembled bag on the rear rack of the ATV, ensuring the "towards front of ATV" orientation is correct.
  3. Left Side Bag Straps:
    • Feed the left side bag strap (L1, L2, L3, L4 - specific strap not explicitly mentioned for this step, but implied from the image) through the rack grab bar and buckle it. Slight adjustments may be needed.
    • Feed the two left side rear bag straps (labeled 2 and 3 in the image, corresponding to L3 and L4 in the overall strap diagram) through the rack grab bar and buckle them.
    • Feed the front left bag strap (labeled 10 in the image, corresponding to L1 or L2 in the overall strap diagram) through the rack grab bar and buckle it.
  4. Right Side Bag Straps:
    • Feed the right side bag strap (R1, R2, R3, R4 - specific strap not explicitly mentioned for this step, but implied from the image) through the rack grab bar and buckle it. Slight adjustments may be needed.
    • Feed the two right side rear bag straps (labeled 4 and 5 in the image, corresponding to R3 and R4 in the overall strap diagram) through the rack grab bar and buckle them.
    • Feed the front right bag strap (labeled 7 in the image, corresponding to R1 or R2 in the overall strap diagram) through the rack grab bar and buckle it.
  5. Middle Bag Straps:
    • Feed the two middle bag straps (labeled 8 and 9 in the image, corresponding to M6 and M7 in the overall strap diagram) that are located under the seat pad through the rack grab bar and buckle them. Slight adjustments may be needed.
  6. Final Tightening: The Matrix Seat Bag should now be secured to the vehicle rear rack with ten buckle straps. Slight strap adjustments will be needed to tighten the bag fit to the vehicle, ensuring it is snug and stable.

Maintenance Features:

The manual does not explicitly detail maintenance features. However, given the product's nature as an ATV accessory, general maintenance would likely involve:

  • Regular cleaning of the fabric to remove dirt and mud.
  • Checking the condition of velcro and buckle straps for wear and tear.
  • Ensuring all buckles are securely fastened before each ride.
  • Storing the bag in a dry place when not in use to prevent material degradation.

The Kolpin Matrix Seat Bag is presented as a practical and robust storage solution for Polaris Sportsman ATV owners, designed for secure attachment and ease of use.

Kolpin Matrix Seat Bag Specifications

General IconGeneral
BrandKolpin
ModelMatrix Seat Bag
CategoryMotorcycle Accessories
LanguageEnglish