To Next PageTo Next PageWhat to do if lamp does not glow brightly on Komatsu Utility D155AX-5 Industrial Equipment?
If the lamp does not glow brightly even when the engine runs at high speed: * **Defective Wiring**: Check and repair any loose terminals or disconnections. * **Defective Adjustment of Fan Belt Tension**: Adjust the alternator belt tension.
What to do if oil pressure caution lamp does not light up on Komatsu Utility Industrial Equipment?
If the oil pressure caution lamp does not illuminate when the engine is stopped, with the starting switch in the ON position, it could be due to: * **Defective Caution Lamp**: Replace the caution lamp. * **Defective Caution Lamp Switch**: Replace the caution lamp switch. * **Defective Wiring**: Check and repair any faulty wiring.
General| Brand | Komatsu Utility |
|---|---|
| Model | D155AX-5 |
| Category | Industrial Equipment |
| Language | English |
Details on where to store the Operation & Maintenance Manual for easy access and reference.
Explanation of signal words like DANGER, WARNING, and CAUTION used to indicate hazard levels.
Information on safety labels affixed to the machine, including those using words and pictograms.
Defines the terms front, rear, left, and right relative to the operator's seat and machine orientation.
Instructions and precautions for the initial break-in period of the machine for optimal performance.
Location and identification of the machine's serial number and product identification number plates.
Details the location of the engine serial number plate on the left side of the machine.
Indicates the location of the serial number plate for the ripper attachment.
A table for recording the machine's serial number, engine serial number, and distributor information.
General safety rules and precautions to follow when operating or maintaining the machine.
Specific safety measures to be taken during machine operation to prevent accidents.
Safety guidelines and procedures to follow when performing maintenance tasks.
Provides an overview of the machine's main components and their general layout.
Detailed explanation of the various components, controls, and displays on the machine.
Explanation of the function and operation of various switches on the machine's control panel.
Description of the main control levers and pedals used for operating the machine.
General guidelines and precautions to follow before performing any inspection or maintenance.
A list of wear parts that require periodic replacement, including their part numbers and intervals.
Specifications for recommended fuels, coolants, and lubricants based on ambient temperature.
A schedule outlining the maintenance tasks required at different service intervals (hours/years).
Detailed step-by-step procedures for performing various maintenance tasks.
Safe procedures for loading and unloading the machine onto a trailer or platform.
Instructions and safety precautions for lifting the machine using a crane or other equipment.
General safety precautions to consider when transporting the machine by road or other means.
Safety precautions and warnings related to handling and charging the machine's battery.
Step-by-step procedure and safety precautions for starting the engine using booster cables.
Safety rules and methods for towing a disabled machine correctly.
Procedure for starting the engine after the fuel tank has run empty, including bleeding air.
Troubleshooting steps and precautions when the machine's battery is discharged.
Identifies common problems and their potential causes and remedies for the electrical system.
Technical data and specifications for the D155AX-5 bulldozer, including weight and dimensions.
General safety precautions when installing or using attachments and options.
Overview of available attachments and options, including track shoes and ripper points.
A guide to selecting the appropriate ripper point based on rock hardness and wear characteristics.
