Komatsu Utility SK714-5 User Manual (English)

Other manuals for Komatsu Utility SK714-5

Questions and Answers:

W
William BeckerSep 7, 2025
What to do if Komatsu Utility Mini Skid Steers does not reach max speed?
- W
  waltonreginaSep 7, 2025
  If your Komatsu Utility Mini Skid Steer machine does not reach the maximum speed selected, it could be due to several factors. The suction filter might be clogged, so try changing it. The endothermic engine might not be reaching maximum speed, in which case you should change the diesel oil filter and check the injection pump. A faulty auxiliary pump (gear pump) could also be the cause, requiring a replacement. Additionally, insufficient pilot pressure could be the issue, so check the delivery and repair or change as needed. Finally, the pressure relief valve setting might be incorrect, so set it to the rated value.
B
Barbara RogersSep 9, 2025
What causes abnormal noises in Komatsu Utility Mini Skid Steers?
- C
  Casey FryeSep 9, 2025
  If you notice abnormal noises during combustion or in the mechanical parts of your Komatsu Utility Mini Skid Steer, it could be due to several reasons. The fuel might have a low cetane rating, so change it to fuel that complies with standards. Overheating could also be a cause. The exhaust silencer inside might be damaged, requiring a replacement. Additionally, excessive valve clearance could be the issue, so adjust the valve clearance.
M
Matthew WagnerSep 12, 2025
What to do if Komatsu Utility SK714-5 Mini Skid Steers engine does not start with starter running?
- C
  Carl SotoSep 12, 2025
  If the engine doesn't start when the starter is running, the possible causes and solutions are: * No fuel: Refuel. * Air in fuel system: Bleed system. * Compression defect: Adjust valve clearance.
L
Laura WrightSep 13, 2025
What to do if Komatsu Utility Mini Skid Steers starting does not engage with key in START position?
- D
  David HernandezSep 13, 2025
  If the starting does not engage when the key is in the START position, check for the following: * Faulty cables: Check and repair. * Battery charge insufficient: Charge battery. * Faulty main fuse: Change.
K
kowenSep 14, 2025
Why lights do not work satisfactorily even with engine running at high speed in Komatsu Utility Mini Skid Steers?
- S
  Scott RiveraSep 15, 2025
  If the lights don't work well even when the engine is running at high speed, it could be due to: * Faulty cables: Check and repair any loose terminal and connection. * Faulty fan belt tension: Adjust belt tension.