TESTING AND ADJUSTING ADJUSTING FUEL CUT SOLENOID
6.
Make rod
(4)
longer to give play
at
the constant
end
of
the stop lever.
Ir
Play
d:
1.0
-
2.0
rnrn
Play
from
end
at
(loosen the rod
1/2
-
1
turn)
TXE00838
7.
Tighten locknut
(8).
Ir
When doing this, be careful that rod
(4)
does
not turn together with locknut
(9).
Be careful
also not to twist stop lever
(6)
with exces-
sive force.
8.
Start and stop the engine
2
or
3
times and check
that solenoid
(6)
is actuated smoothly and that
the engine stops.
TXE00839
12-1
2
95-2
SERIES
To Next Page