To Next PageTo Next Page
Need help?Do you have a question about the Komatsu Galeo D61EX-15 and is the answer not in the manual?
General| Swing Speed | 10.5 rpm |
|---|---|
| Engine Model | Komatsu SAA6D107E-1 |
| Engine Power | 125 kW |
| Blade Capacity | 2.9 m³ |
| Bucket Capacity | 0.8 m³ |
Safety precautions and guidelines for machine operation and maintenance.
Details of the emission control warranty statement for the machine.
Explanation of signal words used to indicate hazard levels.
Information on warning signs and safety labels affixed to the machine.
Defines the directional terms used in the manual relative to the operator's seat.
Location and identification of the machine's serial number and product identification number plate.
Location of the emission control information label on the engine.
Information on warning signs and safety labels affixed to the machine.
General safety rules and precautions for operating and maintaining the machine.
Specific safety precautions to be followed during machine operation.
Procedures and precautions for starting the machine's engine.
Guidance on operating the machine safely and effectively.
Safety measures to take when moving the machine.
Safety guidelines for operating the machine on inclines.
Instructions on the proper and safe use of the machine's brakes.
Procedure for safely parking the machine.
Guidelines and precautions for transporting the machine.
Precautions and hazards related to the machine's battery.
Procedure and safety precautions for jump-starting the engine using booster cables.
Safety procedures and methods for towing the machine.
Essential safety measures to follow during maintenance activities.
Pre-operation checks to ensure the machine is safe to use.
Safety measures for moving the machine in forward or reverse directions.
Safety measures to follow when traveling with the machine.
Specific safety guidelines for operating the machine on slopes.
Precautions for operating the machine safely on snow-covered surfaces.
Procedure for safely parking the machine.
Guidelines and precautions for transporting the machine.
Safe procedures for loading and unloading the machine.
Safety precautions and hazards associated with the machine's battery.
Procedure and safety precautions for jump-starting the engine using booster cables.
Safety procedures and methods for towing the machine.
Mandatory procedure to stop the engine before performing maintenance.
Importance of maintaining a clean and organized work area for safety.
Procedure for securing the machine by locking levers when leaving the operator's seat.
Guidelines for using handrails and steps to safely mount and dismount the machine.
Precautions to prevent burns from hot coolant or oil.
Measures to prevent fire caused by fuel, oil, electrical wiring, or flammable materials.
Warning against making unauthorized modifications to the machine.
Precautions for ensuring safety at the jobsite before starting operations.
Importance of proper ventilation in enclosed areas to prevent gas poisoning.
Precautions regarding potential exposure to asbestos dust.
General guidelines and important points for performing machine maintenance.
Overview of services including oil, fuel, coolant, and oil analysis.
List of wear parts, their part numbers, and recommended replacement frequency.
Specified torques for tightening various bolts and nuts on the machine.
Identifies safety-critical parts and their replacement intervals.
Comprehensive schedule of maintenance tasks based on operating hours.
Detailed procedures for performing various maintenance tasks.
Technical specifications for the machine, including weight, dimensions, and travel speed.
Safety precautions when installing authorized attachments and options.
Instructions for the operation and maintenance of the hydraulic ripper attachment.
Procedure for adjusting the air suspension seat for optimal comfort.
Procedure for adjusting the deluxe seat for comfort and ergonomics.
Procedure for removing the headrest.
Instructions for installing fire extinguisher and first-aid kit.
