HYDRAULIC EXCAVATOR
PC2000-8
9
EASY REPAIR & MAINTENANCE
8
H YDRAULIC E XCAVATOR
PC2000-8
KOMATSU
WebCARE server
Personal
computer
terminal
(for downloading
data)
Internet
Komatsu
distributors
Customer job site
Satellite
communication (option)
Sustained high level performance
An achievement in the evolution of maintenance
Advanced Layout for Easy Checking and Maintenance
Catwalk surrounding the power module and center walkway
provides easy access to the inspection and maintenance points.
Remote Drain Piping Enables Drainage from the Ground
Remote drain piping provided to drain hydraulic oil, PTO oil,
engine oil and coolant enable performing drainage work from
the ground.
Monitor function
Controller monitors engine oil
level, coolant temperature,
battery charge and air clogging,
etc. If controller senses any
abnormality, it is displayed on
the LCD.
Maintenance function
Monitor indicates replacement
time of oil and filters on LCD
when the replacement interval
is reached.
Trouble data memory
function
Monitor stores abnormalities for effective troubleshooting.
Ground Refueling System
Remote refueling port enables
ground level refueling.
Automatic Greasing System
Greasing work equipment and bucket is
fully automated. Since the system
carries out automatic greasing at regular
time intervals, greasing is hassle-free.
Large Capacity Grease Tank and
Easy-to-supply Refill Piping
(optional)
The machine is equipped with 200 ltr
52.8 U.S.gal large capacity grease tank
enough to perform 24 hours operation.
An optional remote refill part enables
grease supply to the tank from the
ground.
Reduced Maintenance Costs
Hydraulic oil filter replacement is
extended from 500 to
1000 hours.
Fuel filter replacement
interval is extended
from 500 to 1000
hours.
Easy Cleaning of Radiator
The hydraulically driven fan can be
reversed to facilitate cleaning of the
cooling unit. In addition, this feature
contributes to reducing warm-up time
in low temperatures.
Fuel Pre-filter
(with Water Separator)
Removes water and contaminants from
fuel to enhance the fuel system reliability.
Coolant
PTO
Refueling port
Fuel drain
Remote supply port (optional)
Hydraulic filter
(Eco-white element)
VHMS (Vehicle Health Monitoring System)
VHMS controller monitors the health conditions of major
components and enables remote analysis of the machine and
its operation. This process is supported by the Komatsu
distributors, factory and design team. This contributes to
reduced repair costs and to maintaining maximum availability.
200R grease tank
Centralized Filters
Centralized filters contribute to easy maintenance.
Engine oil
Dust Indicator with
Five-step Indication
Informs of air cleaner
clogging in five steps
to warn of filter
condition.
Hydraulic oil
Large Fuel Tank
3400 ltr 898 U.S. gal large fuel tank enables continuous
operation for 24 hours.
Service Center (optional)
Collective arrangement of drain and filler
ports for fuel, oil, grease and coolant on
the service
center, which
is hydraulically
moved up and
down, makes
possible quick
servicing from
the ground.
Battery Isolator and Starting
Motor Isolator (optional)
When inspection and maintenance or
storing the machine long term, the
isolators serve to
isolate both
positive and
negative
terminals of the
battery and
starting motor.
Jump Start Receptacle (optional)
Jump start receptacle allows starting
engine from external power source.
Photo may include optional equipment.
To Next Page
Loading...
