1514
FidiFloc: Removing the flaker
How to remove the hand flaker of your FidiFloc: Short instructions
A
Rotate the grinder’s hopper toward “coarse” until
it can be taken off easily.
B
Remove the flaker’s rectangular funnel lid
(picture A).
C
Shift the housing cover of the flaker towards the
crank and take off (picture B).
D
Remove the thin metal cover of the flaker. Insert
a knife blade into the lower opening of the hous-
ing and hold its back edge between the rollers
to prevent them from rotating, while turning the
crank handle counter-clockwise to remove it from
flaker as in picture C. (The corner of a kitchen
towel can substitute for the knife blade.)
E
Slightly loosen the white screw indicated in
picture C.
F
Remove the flaker from the housing in upward
direction (picture E).
To reassemble, reverse this procedure except that
when reassembling, the rollers do not have to be
kept from turning. Simply insert the crank and
turn in a clockwise direction.For more detailed information about the use
of the integrated hand flaker, please consult the
attached FlicFloc User’s Manual.
white
screw
A
B
C
D
To Next Page
Loading...
